Minuteman UPS PRO-E User Manual download pdf (Page 15)

English

BATTERY REPLACEMENT PROCEDURE

PLEASE READ THE CAUTIONS AND WARNINGS BEFORE ATTEMPTING

TO REPLACE THE BATTERIES

Hot-swappable batteries mean that the batteries can be replaced without

powering down the whole UPS system.

NOTE: If there is a power interruption while replacing the hot-swappable

batteries, with the UPS on, the load will not be backed up. To

hot-swap the batteries start with step number 6.

1. Turn off the equipment that is plugged into the output receptacles of the

UPS.

2. Press and release the On/Off/Test button on the front panel to turn the UPS

OFF.

3. Unplug the UPS's AC power cord from the AC wall outlet.

4. Unplug the equipment from the output receptacles of the UPS.

5. Unplug the computer interface cable from the rear panel of the UPS.

6. Remove the retaining screws from the bottom of the front panel of the UPS.

7. Grasp the bottom of the front panel and gently pull the front panel off the

UPS.

8. Lay the front panel on top of the UPS.

PRO500E

PRO500iE

PRO700E

PRO700iE

PRO1100E

PRO1100iE

Battery

Model #

1-12V9Ah

2-12V7Ah

3-12V7Ah

PRO1500E

PRO1500iE

3-12V9Ah

PRO-E

Model #

Replace batteries with the same number and type as originally

installed in the UPS. These batteries have pressure operated vents.

These UPSs contain sealed non-spillable lead acid batteries.

CAUTION:

Panasonic

Part #

LC-R129

LC-R127 LC-R127 LC-R129

Yuasa Part # REW45-12 NP 7-12 NP 7-12

REW45-12

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comments to this Manuals

No comments

Minuteman UPS PRO-E User Manual Page 15

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) Minuteman UPS PRO-E